How a repeater works in Minecraft. Creating a repeater in Minecraft. As a diode and as an insulated wire

The minds and hearts of avid gamers were captured by the brainchild of Markus Persson, a programmer from Sweden. The popular game Minecraft offers players a world in which many items can be created themselves using existing resources. One such item is a redstone block called a repeater. Why do you need a repeater in Minecraft: firstly, this block allows you to conduct electrical signals after a certain time period. Secondly, the repeater can amplify these signals, or, conversely, delay them if a delay has been previously set. In simple terms, if during the game a stripe of red dust was made, then approximately in its center you need to place the created repeater block.

As a result of this manipulation, the mechanism located at the end of such a wire will begin to work slower, and slower for a predetermined time interval. In Minecraft, this interval can be from 0.1 to 0.4 seconds. In general, a repeater is a very useful and multifunctional item in the world of Minecraft. A detailed description of its functions can be an excellent explanation of why there is a repeater in Minecraft. So, the first function of this red stone block is already contained in its name. The fact is that in the world of the Minecraft game, an electrical signal can be transmitted through wires made of red dust only on a limited number of blocks. The number of blocks cannot exceed fifteen.

The repeater is designed to get around this limitation in the game: installing it on the fifteenth block allows you to “update” the signal and carry it further, again to a maximum of the fifteenth. In early versions of this popular game, when repeaters had not yet been introduced by the developers, special NOT gates were used for a similar purpose. The second important function of repeaters in Minecraft is the ability to block the passage of a signal in the other direction. The red stone can only receive a signal from the block behind it. We are talking about the side closest to the player. And the signal can be transmitted further only to the block located in front of the repeater.

Thus, the red repeater cannot interact with the blocks that are around it, and this point can also be used - the repeater becomes analogous to an insulated wire. This feature is very useful for those players who want to create a fairly compact circuit. When a repeater has been crafted in Minecraft, in front of the red stone at the entrance to activate it (in other words, turn it on), you need to install one of the following objects: – a section of wire made of red dust; – switch (suitable for any type); – red torch; – another red repeater (it must be facing the first input); – a block (which receives power, no matter how). An activated repeater is capable of “launching” objects that are located by the player at its output.

Such objects can be, for example, blocks that are capable of conducting electrical signals, or a section of wire (red dust). The repeater includes another identical block of red stone, facing it with an entrance. Obviously, any mechanism that is controlled by redstone installed at the repeater output will also be turned on. The third function that explains why a repeater is needed in minecraft is to delay signals. The red stone does not transmit an electrical signal instantly, but after a certain period of time. To set the desired time interval, you need to right-click on the repeater. The game requires minor adjustment - from 0.1 to 0.4 seconds.

If the player needs a longer signal delay, then for this purpose it is necessary to install several red repeaters in series one after another. Thus, the repeater is a very useful thing in creating your own world in the game Minecraft. How to get a red stone? In general, crafting a repeater in minecraft is available to any player. As with any other crafting of items, certain ingredients are required: red dust, stone and a red torch. In a 3x3 crafting grid, they need to be arranged as follows: three blocks of stones in the three lower cells (right, middle and bottom); in the middle cell there is red dust, and to the left and right of it there are red torches, one on each side. It should be noted that in early versions of the game, players used a pair of red torches as repeaters.

This option may still be relevant now, but repeaters in the form of red stones are now more preferable and, moreover, are very compact. Undoubtedly, information on minecraft, what a repeater is needed for and how to create it are very useful for players just starting to get acquainted with the world of this game. However, some secrets on this topic will be of interest to experienced users. For example, it is useful to know that the vast majority of devices in the world of Minecraft, be they mechanical or automatic, simply cannot be created without the use of red repeaters. By the way, they can be blocked by bringing another red repeater to any side, which is in an activated state at that time.

This is done for the purpose of keeping the electrical signal at the output in a “frozen” state. When this happens, a Bedrock rod appears instead of the rear red flare on the repeater that was blocked. Moreover, a thin rod appears across the direction of the electrical signal. In earlier versions of Minecraft, there was no such interesting ability to block red stone. It appeared in version 12w42a (1.4). The texture of the repeater was also changed there. During the game, it may happen that an arrow hits the red repeater. If it works in a pulse generator, the moment the arrow hits the player will hear a characteristic sound similar to strumming. And the weapon itself will stand vertically for a certain period of time and will not disappear.

To start making a red repeater, it is necessary to have in your arsenal the player should have such parts as a red torch and dust, as well as a stone. With the help of these elements you will be able, perhaps not the first time, but still, to make a red repeater, which is a type of solid block.

Using a repeater

Once you have succeeded in making a repeater in Minecraft, consider how it will be useful to you in the game, since this element can be used for several purposes. In particular, the repeater has the property of updating the received signal and transmitting it further. Let us remind you that the signal can be transmitted over no more than 15 blocks. With the help of a repeater, you can transmit a signal through wires to 30 blocks, that is, it expands your signal transmission capabilities as a player by another 15 blocks.

The repeater can also be used as a diode, and also as an insulated wire. The signal can only be received by the repeater from the unit located at the rear. The repeater can transmit the signal exclusively to the block located in front of it. These properties of the element can be used to create an obstacle that will not allow a signal to pass through the wire in the opposite direction.

Many experienced players who learned how to make a repeater in Minecraft immediately after it appeared in the game use this element as an insulated version of a regular wire. In principle, when building compact circuits, you can successfully use this repeater function, since it does not have the ability to interact with neighboring blocks of a different type, regardless of their origin.

Techniques for use

If you place certain objects at the repeater input, they can activate it. Such elements of the Minecraft game include another repeater, whose front panel faces the element that requires activation. The activator can be a red torch and any of the switches offered in the game, a section of wire and a block that must first be powered in any way.

Please note that after you have succeeded in making a repeater in Minecraft, you can use it to activate many game elements that must first be placed at its entrance. Using a repeater, a section of wire made of red dust and any mechanism controlled by a red stone are activated. The activator is a repeater for another repeater facing its input, any block that conducts electricity.

The repeater can be used as a delay element, for which you need to click on its RMB. The delay value varies from 0.1 to 0.4 seconds. If a longer delay is required, then several repeaters are used, installed in strict sequence, one to one.

A repeater is unlikely to be needed by a beginner who has just begun to explore the world of Minecraft. But for those who have already started creating redstone circuits, it is important to know about the functions performed by the repeater and its features.

A repeater is a multifunctional device.

Its simplest function– repetition of the redstone signal. Redstone transmits a signal only to 15 blocks. But what if you need to build a large mob trap or a long automatic farm? You cannot do without a repeater, because it is capable of transmitting the redstone signal to another 15 blocks.

The second repeater function in Minecraft– diode function. The fact is that the repeater receives a signal from only one of the four sides and transmits it only from the opposite side. This property can be used in complex circuits when redstone tracks need to be laid in parallel so that they do not interact with each other. Knowing this repeater feature will help save space and resources when creating circuits.

Third repeater function consists of signal delay. The delay is set by a switch and ranges from 0.1 to 0.4 seconds. The latency can be increased by placing several repeaters in a row. This property is used when creating traps for mobs so that they have time to reach the place intended for them after passing the pressure plate or tension sensor. Using a signal delay, you can make flickering lighting for your home, and it is also used to optimize the operation of many mechanisms.

How to make a repeater in Minecraft? Very simple!

We burn three cobblestones in a stove, obtaining a stone block. We find three units of redstone, craft red torches from two, and place the stone on the workbench below, a red torch in the middle cells on the left and right, and the remaining redstone in the central one. That's all - a useful mechanism in our pocket!

Does it happen that you need to diversify your computer life a little? Therefore, I suggest choosing a game on tenstars. Follow the link for lists of games by genre TenStars. Choose the one that suits you best!

In today's lesson we will study the innovation of Beta 1.3, which I briefly mentioned last time. This time we will not slide past it, but will look at it from all sides.

Part zero. Repetition is the mother of learning.

Last time we amplified the signal with a clever design of two inverters. However, I honestly made a reservation that it was a retro device. In Beta 1.3, Notch gave us a new element of Red Logic, which can be used to amplify the signal. It is called by three names - Repeater / Diode / Delay.

Let's figure out how it works.

Part one. Diode.

Despite the fact that the Amplifier was written in the first mode, to understand the operation of the element, it is necessary to consider the principles of its operation from the Diode mode.

Minecraft Red Logic Lessons. Lesson One: Follower / Diode / Delay

Are you connecting? (With)

This is true. The triangle on the element is engraved for a reason. For electronics connoisseurs and simply for those who have studied well, there is no need to explain anything here. However, if you do not know the secrets of this electrical element, there is absolutely no need to run to the nearest library and take out a hefty volume there. It's simple: the signal travels in the direction indicated by the arrow in the figure. It can be even simpler - towards the top of the triangle (in the future I will call this the top of the diode or the output, and the opposite side - the base or input). If the signal comes from the other side, the diode remains off:

Minecraft Red Logic Lessons. Lesson One: Follower / Diode / Delay

In this figure, both signals go from right to left. In the lower case it enters the base of the diode, and in the upper case it enters its top.

Now let's discuss how to connect the wires to the diode. The wire must fit into the base and not run parallel to it:

Minecraft Red Logic Lessons. Lesson One: Follower / Diode / Delay

Actually, as with other elements of the chain:

Minecraft Red Logic Lessons. Lesson One: Follower / Diode / Delay

True, you can connect the wire to the door from the side. The diode will not tolerate such an attitude towards itself.

But the output wire doesn’t care how you connect it. You can plug it in, or you can just put it next to it, the result in both cases will be the same: the signal will calmly go along the wire about its business.

Part two. Repeater.

Let's return to our test room from lesson zero. On the floor we had something like this sad picture:

Minecraft Red Logic Lessons. Lesson One: Follower / Diode / Delay

Rule of Fifteen. Visual demonstration.

And this is what we get by installing a repeater:

Minecraft Red Logic Lessons. Lesson One: Follower / Diode / Delay

That is, the repeater, having received a dying signal at the input, repeated its value at its output, resetting the count of fifteen blocks, as the circuit of two inverters did.

Well, there is an incredible saving in space and height. However, in terms of costs it turns out to be more expensive, because when crafting, the same components of Red Logic are spent as with two inverters and plus three more stone blocks. You have to pay for compactness.

Part three. Delay.

The most interesting, in my opinion, mode of operation. Try right-clicking on an element and you will see how the distance between the torches changes:

Minecraft Red Logic Lessons. Lesson One: Follower / Diode / Delay

The greater the distance between the torches (see picture), the greater the signal delay on this element. To find out the delay time, simply multiply the distance between the torches by 0.1 seconds. That is, if your delay element looks similar to element number 3 in the figure, then its delay will be 0.3 seconds.

Want to make a delay of 0.6 seconds? No problem. Just connect another delay of 0.3 seconds to the output of the element. You can add another one at 0.4 and get a full second delay.

To demonstrate the possibilities, I advise you to craft a note block. The principle of its operation is approximately the same as that of other circuit elements: the signal arrives at the note block, the block plays the note. The note can be adjusted by right click. In short, I think I will devote a separate lesson to note blocks, since they are related to Red Logic (we will write DragonForce – Through the Fire and Flames =D). Minecraft Red Logic Lessons. Lesson One: Follower / Diode / Delay

Do not pay attention to the positive wire that is located after the amplifier, it works as expected.

Tune two blocks to two different notes. One is high, the second is low.

Minecraft Red Logic Lessons. Lesson One: Follower / Diode / Delay

Step on the button, listen to the created musical sequence. Even in the picture you can see that the blue note is lower than the orange one, that is, it came out later. Great power of the delay element.

For this, allow me to take my leave.

Beginner players may not realize this, but Minecraft has a large number of different mechanisms, each of which is unique and has its own function. Moreover, many mechanisms are used for other purposes, that is, they provide benefits in ways that were not initially suspected by the developers. For example, we can take one of the most common mechanisms in the game - the repeater. Everyone must be able to do it, otherwise you will greatly reduce your ability to use mechanisms and electrical networks. Repeaters in Minecraft will bring you a lot of benefits; to get it, you need to study all the details and aspects of both the manufacture and use of these items.

Specifics of networks in Minecraft

The place to start is not with the mechanisms themselves, but with the networks to which they will be applied. Repeaters in Minecraft are elements of an electrical network, which, in turn, consists of two objects connected by red dust that transmits a signal. One of the objects must send a signal, and the other must receive it and react accordingly. The simplest example is an automatic door. If you connect the door to some kind of switch, for example, with a button, then when you press the button, the signal will travel through the red dust, reach the door, and it will open. But it is worth noting one important point - the signal is transmitted only over a distance of fifteen blocks. If the object is located at a greater distance, the signal will simply be lost and nothing will happen. Do all objects really need to be placed at such a small distance in order for them to interact with each other? Naturally, no, because this is precisely what repeaters in Minecraft are for. With their help, you can significantly expand the range of any of your circuits or networks.

How does a repeater work?

Repeaters in Minecraft are blocks that are placed in the path of a signal to extend the distance over which it travels. You can understand the principle of the process if you think about the name. It turns out that this device repeats the signal, resetting the count of blocks it can move to, and starting all over again. As a result, a long network will look like this: switch, red sand (up to fifteen blocks), repeater, red sand, object. There can be any number of repeaters on the network, so you can get creative and come up with intricate mechanisms. But to use this device, you must first obtain it. Since it is impossible to find it, we need to consider in detail how to make a repeater in Minecraft.

Repeater manufacturing

It's no secret that most items in the game are created according to certain recipes. If you want to learn how to make a repeater in Minecraft, then you will need to learn one more recipe. But don’t be discouraged - it’s quite simple and doesn’t require any special expenses or rare materials. You will need three stone blocks, two torches and one red dust block. Place the last ingredient in the central cell of the workbench, place torches on the sides of it, and completely fill the bottom row with stone blocks. Now you are ready to craft your first repeater. You can make several at once so that you don’t have to return to this process later and can immediately use them when needed. The repeater in Minecraft 1 5 2, 1 7 2 and other versions is made the same way, so you don’t need to remember different recipes - make this device for your own pleasure.

Main property

As mentioned earlier, this mechanism has several uses. You know how to craft a repeater in Minecraft, so it’s time to experiment - you can try it in different roles. Naturally, first of all, use it for its intended purpose - to reset and update the signal in electrical networks. But don’t forget that it can be applied in other, completely unexpected areas. You can try to combine its effect with other items, because that’s what Minecraft recipes are for. The Repeater will become one of your most used units, especially if you unlock at least a couple of its additional features.

Insulated wire

When you make a path of red dust, you can always make various branches, remove unnecessary sections, and so on. A redstone path is a kind of analogue of a wire in Minecraft. But at the same time, you can use the repeater as an insulated wire, which is what red dust sometimes lacks. The secret here is that the repeater only receives the signal from one specific side, and releases it exclusively from the opposite side, that is, it is very important that you position it correctly, since any deviation will not allow the system to work as required. This feature prevents the current from flowing in the opposite direction, but more importantly, the wire is protected from external influences, since the current cannot be supplied from the sides. This is how the repeater turns into an insulated wire.

Signal delay

Another interesting point when using a repeater is its operating modes. In total, this device has four modes, each of which gives a specific signal delay. In the minimum mode this figure is one tenth of a second, and in the maximum mode it is four tenths. You can install multiple repeaters in a row to achieve higher latency for your purposes.