How to raise a dragon from an egg without mods. How to summon an ender dragon. egg hatching process

This is the article that will teach you how to raise and take control of the Ender Dragon!

The Ender Dragon is a very dangerous enemy and it spawns in the End biome!

It is difficult to beat him, but if you do, you will get an egg from which you can get a baby dragon. You need to know a lot of rules in order for you to succeed!

Since without mods it is not possible to get your own personal dragon, we will need a mod “ Dragon Mounts”.

Now I will tell you how to get to the End, or in other words, how to find the "Portal to the Ender World."

Finding it will not be an easy task, for this you need the “Eye of Ender”, an item that is easy to craft, you need to place “Fire Powder” in the crafting window above the “Ender Pearl”.

The Eye of Ender is used in the following way: you release it by pressing the right mouse button.

After you click it will rise and fly towards the portal. After the fall, repeat. As the portal approaches, the Eye will fly lower, and where it starts to go underground you must rummage to find the portal!

You need to stock up on quite a few items called "Eye of Ender" before looking for the portal, because:

• The route might get off track, or you might just lose the Eye without following it!
• To activate the portal, 12 Eyes of Ender are used, they must be inserted into the cells!

Once you're done, the portal will activate! But before you use the portal, make sure you have everything you need to kill the Ender Dragon! You must have good weapons and armor.

When you spawn in The End, you will be attacked not only by the dragon, but also by a large number of Endermen!

Before you start killing the dragon, look around. You will see many towers on which burning Crystals are located, these Crystals heal the dragon. So before you attack the dragon, break them. This is done with a bow!

How to grow a dragon from an egg?

To grow a Dragon, special conditions are required!

The egg you received must be placed in a hot place, for example, in lava! This will speed up the hatching process!

How to properly care for a Dragon:

He eats only raw fish. So stock up on it ahead of time!

He will grow up after a while and will start to follow you and attack enemy mobs! Don't worry too much about your Dragon, he has a lot of lives, so the chance of his death is extremely small!

How can the Dragon be used?

As soon as the Dragon grows up, he will already be yours. It can be used to quickly move to any point on the map! You need a saddle to fly! If you feed him with bones, he will follow orders, for example, “Sit!”.

To get to the dragon, you must first make a portal to the edge. In order to find in the End, you must kill several enders to get their eye. If you throw it, it will fly in the right direction.

To fight with the dragon of the edge, you need to prepare well. To do this, you need to craft strong armor, make and brew diamond sword, bow and arrow, and stock up on food.

To defeat a dragon in Minecraft, you must first destroy the sources that restore its health. To do this, you need to destroy the pillars on which they are located. When the dragon is not able to restore its health, it will be easy enough to kill it by hitting it.

If you manage to kill the dragon, you will gain a large amount of experience and open a portal through which you can return home. And most importantly - you will find an egg from which you can make a dragon in Minecraft.

How to grow a dragon in Minecraft

You can get a dragon by placing an egg mined in the world of enders in a warm place. The more you do, the faster you can achieve the desired result. To increase the temperature around the egg, you can overlay it with lava. You need to activate the growth of the dragon by clicking on the egg right click mice.

How to train your dragon in Minecraft

The hatched dragon needs to be fed with fresh fish, which can be caught in any body of water with a fishing rod.

The little dragon will constantly run after you and protect you from enemies.

To tame a dragon, you need to install a special one on Minecraft Mod Dragon Mount. After its installation, it will be possible to give the animal commands by treating the bones.

When the dragon grows up, it is possible to make it rideable. To do this, you need to craft and put it on a fire-breathing animal.

Some players claim that it is easier to make a dragon in Minecraft - to summon it using a special command. However, in practice, only the owners of the server can do this.

Many amazing creatures live in Minecraft, but the dragon is of particular interest to players. This is a rather dangerous mob that can cause damage to the character, but it is quite possible to make him your ally. Below you can find out how to create a dragon in Minecraft.

How to create a dragon in Minecraft without mods

First of all, you should know that the dragon is a creature that lives in the Land. He cannot be tamed, so he is very evil. However, even in this situation, you can find a way out.

First, the player must build a portal to the End (Ender) and fight the dragon. After that, he will receive a dragon egg as a prize. It will need to sit out, and you will have your own dragon. First, you need to put the egg in a warm place and right-click on it. Wait a bit until the dragon is born. Immediately after the birth of a pet, feed it with fish. After that, you can play with him. The dragon will protect you from evil mobs and play with you.

It is impossible to create a dragon egg in Minecraft on your own. More information about the dragon egg can be found in our article -.

How to create a dragon in Minecraft using a mod

You can create a dragon in Minecraft using the Animal Bikes mod. You can download it here - minecraft-book.ru. After installing it in the root folder of the game, you can launch Minecraft and start creating a dragon. Moreover, this mod allows you to create many other types of animals - dinosaurs, bats, deer, gafts, cows.

To create an ender dragon with this mod, you will need:

• 8 blocks of end sand,
• 1 saddle (crafted from 3 pieces of rawhide, 1 gossamer, 1 iron ingot).

If you want to fly your new pet, you will need to press the space bar. It is important to know that animals created using the Animal Bikes mod are able to reproduce and can be painted in different shades. If you want your dragon to exhale fire, then during the flight, take a lighter in your hand and press the right mouse button.

Also in Minecraft, you can create a Chinese dragon that will shoot a salute. To craft it, you will need the following components:

• 8 rockets;
• 1 saddle.

To make the dragon fire a salute, you need to pick up gunpowder and right-click. Happy crafting!

How to train your dragon in minecraft?

The Minecraft game has the ability to tame various pets, and then farm. However, many gamers find it boring and are looking for ways to tame monsters and dangerous animals like spiders, creepers, and skeletons. You can also tame a dragon in Minecraft, but not all users know how to do it.

Consider how you can tame a dragon in Minecraft yourself or with the help of a mod.

How to Train Your Ender Dragon in Minecraft

1. In order to get an Ender dragon egg, from which a baby dragon will later hatch, you must first kill this dragon in the world of Ender, which can only be reached through a portal.
2. Then, having received an egg, it is necessary to create special conditions for the dragon to hatch. Find a warm place. To do this, you can use lava, then hatching will happen quickly.
3. After the dragon hatches, it is necessary to feed it with raw fish. You will need a lot of fish, so it is advisable to stock up in advance.
4. The pet will constantly run after you and protect you from monsters. Killing a pet is not so easy, so you don't have to worry about it. In addition, with the help of a bone, you can give him commands.
5. Over time, the dragon will grow, and it will be possible to use it as a means of transportation. However, it is recommended to have a saddle.

However, in most Minecraft versions there is no way to tame a dragon. You need to download the Dragon Mounts mod, which will allow you to do all these actions with the dragon.

Full information about the Ender Dragon: How to spawn, how to get an egg, VIDEO! Instruction Facts about which you did not know.

Spawns in the world as soon as it is created. This only happens once, at the start of the game. After his death, in the Lower World, along with the portal to Normal, an egg will spawn, which does not hatch on its own. The dragon needs to be revived.

Ender Dragon Spawn in Overworld:
Called by commands. The line contains the following command: /summon ender_dragon (DragonPhase:0)
The disadvantages it does:

1. Breaks blocks that get in his way.
2. Breaks through the ground, making a hole in the mountain.
3. Turns buildings into ashes!

Therefore, if you want to call him in the Ordinary World, then be careful!

How to grow an Eder Dragon egg

You can grow an Egg in the normal World only with mods. But bringing the monster back to life and fighting it again is possible.

To do this, you need 4 End Crystals, which we have on each side of the portal to the Normal World. After that, the portal itself will disappear. In this case, do not forget to remove the egg, as it will simply disappear. After the placed crystals, buildings will be resumed in the Lower World and, accordingly, a new Dragon will spawn.

Ender Dragon Facts

1. For the primary kill, 12,000 experience will be awarded. Subsequent times - 500.
2. When it appears in the Ordinary World, it flies to the Zero coordinates, and only then it will fully fight with the player and pursue wherever the player goes.
3. Upon death, it flies up 128 blocks and then disappears completely.
4. The experience granted after the death of the Ender Dragon raises the level of the player without experience, up to 36.
5. In Creative Mode, it does not attack and will not directly damage the user.

Watch the video on how to resurrect the Ender Dragon.