Schubert cards. Schubert's Trehverstovka watch online. PGM or General Survey Plan

This article is about deep metal detectors (or else they are called depths ).

How are deep metal detectors different from others?

The task of discriminating ferrous metal from non-ferrous metal is not in front of them, although some have such a function. But it does not work 100%, because. with increasing depth, the complexity of metal identification increases. And the size of the target also does not allow us to conclude whether the target is colored or black (the target is very large, the electrical conductivity is high).

Therefore, many manufacturers do not include such functionality in their deep devices.

Overview of models of deep mine detectors

What is the difference between frame and reel depth probes?

What is a depth frame?

Deep Hunter Golden Mask

Possible sensors:

• Frame 125x125cm
• Frame 180x180cm
• Frame 300x300cm
• Coils 20cm, 28x42cm, 42cm or 58cm

In addition, the Deep Hunter PRO-3 can discriminate against metals (black - non-ferrous).
Deep Hunter Pro-3 SE has both automatic ground adjustment and manual. In addition, it has a wider range of adjustment for ignoring small targets.

Depth TM-808 Whites

TM-808 has been in production for a long time. And today it is outdated.
If you do not touch on its search characteristics: search depth and stability, then TM has a big minus - coils that are subject to deformation.
When the search elements are deformed, the search depth disappears.
This is a significant drawback for field work conditions.

TM-808 has no discrimination. (but, as we said earlier, this is not very important for a deep diver)

The depth for the TM-808 is stated to be 4m (apparently for a tank). Specifications are not specified in the documentation. In practice, the depth is much more modest.

The TM-808 is considered to be good for use in confined spaces.

Depth Fisher Gemini-3

The search characteristics of the Fisher Gemini-3 are similar to those of the TM-808. In general, the device is outdated.

Gemini-3 consists of 2 boxes (with sensors inside) spaced along the edges of the bar. This deep metal detector is worn on the shoulder or 2 boxes are used by 2 different people.

There is no discrimination in Gemini-3.

The depth for the Fisher Gemini-3 is stated in the documentation - 6m (probably for a tank). In practice, none of the search engines could confirm this depth.

Depth nozzle for GTI-2500 Garrett

The characteristics of the Garrett GTI-2500 depth probe are quite modest (more modest than those of the Gemini-3 and TM-808). They are not listed in the documentation.
However, search engines consider the 2500 deep metal detector to be more practical.

The GTI-2500 has 2 hard shell coils on a hard stem.

Detech SSP-5100

And so SSP-5100 can use both frames and coils.

Detech SSP-5100 is very attractive in description. The spectrogram of the signal is displayed on the screen.
As you can see from the picture, the depth is up to 4m with a frame of 100x100cm.
But nothing is written in the instructions about the depth!

It remains only to try how it works in practice (watch user videos).

What is important to know when buying a deep metal detector?

What you need from a deep metal detector:

• variety of sensors (coils and frames)
• stability
• ignoring small debris
• search depth

When searching for a war, the depth of the target can really reach up to 3-4 meters. Of course, in this case it is important. But subject to the stability of the device itself.

It is better to focus on videos made by users, in which they show the work of the depth finder and its depth of search.
Of course it won't maximum parameters. But they are workers. Those. the depth at which a deep metal detector easily finds a large object.

Surely many of you are fond of books and films about adventures. Take at least the famous Indiana Jones, whose name has become almost a household name. The romance of adventure, mystery, mysticism, treasures - all this has attracted, attracts and will almost certainly attract thousands of people at all times. But if in works of art the search for values ​​looks very exciting, then in reality it requires hard and painstaking work. A little lighten it up able modern technologies. And to be more precise - metal detectors, which will be discussed in this article.

First, let's figure out what kind of device it is. A metal detector is a device that allows you to detect metal in a neutral or weakly conductive environment. These environments may be different, but the models from our rating are used, as a rule, for searching in the soil. This, coupled with advances in electronics that made it possible to create a compact and lightweight device, made metal detectors popular among treasure hunters. Moreover, both among amateurs and among professionals.

And here it is worth understanding that a metal detector is a device for which design and beauty are not important. It is, first of all, a complex tool for a specific task, and therefore regular updates and improvements in technology are needed to better determine metals. Ideally, in order to choose a device specifically for your needs, you need to have a good understanding of such terms as “metal discriminator”, “pinpoint”, “detection depth” and many others. We will move on to the rating, where we will consider models divided into categories depending on the cost. It is much easier for beginners, and the functionality directly depends on the price of the device.

The best inexpensive metal detectors for beginners: budget up to 20,000 rubles.

The first category is addressed to the most inexperienced treasure hunters, for whom the chosen metal detector will be the first, and therefore it is very important to choose a model that will not empty your wallet - hence the conditional price limit of 20 thousand rubles. Of course, you can decide that it is much better to pay extra 10 thousand and get a device at a higher level, but such a decision is only partly reasonable. Firstly, it is far from a fact that treasure hunting will captivate you enough to spend large sums on it. Yes, if you have been out searching with your friends for more than a year, the answer is obvious, but in all other cases it is worth moderating your ardor. Secondly, more expensive models have more functionality that is very difficult for a beginner to master. Therefore, even a significant advantage on paper over a budget model can be absolutely useless in the hands of an inexperienced search engine. In general, if you know exactly what you need, scroll down to the next category. For beginners, we advise you to familiarize yourself with the rating of the best inexpensive metal detectors.

5 Minelab Go-Find 11

Light weight
Country: Australia
Average price: 7490 rubles.
Rating (2019): 4.5

Treasure seekers praise the inexpensive Minelab metal detector very much. With a detection frequency of 7.8 kHz and a 20 cm coil, it increases the accuracy of finding non-ferrous and ferrous metals. There is moisture protection, which allows you to continue searching for coins in water at a depth of up to 15 cm. Reviews often mention the light weight, only 1 kg, and the compactness of the device, which is ideal for long searches and hiking trips.

The metal detector is powered by four AA batteries. There is a sensitivity setting and two search modes. The first one searches for all metals, the second one ignores garbage. But in such a simple model, gradation does not guarantee a 100% result. However, Go-Find 11 can rightly be considered the best budget option for the first metal detector.

4 Deteknix Quest Q20

The best model for land and water
Country: USA (made in China)
Average price: 16900 rubles.
Rating (2019): 4.5

This is the brainchild of an American-Chinese brand that creates universal metal detectors. The model belongs to professional equipment, despite its modest price. The equipment allows you to immediately start searching for metal both on land and in high humidity conditions: Deteknix Quest Q20 can be immersed in water to a depth of up to three meters.

The device uses an operating frequency of 9 kHz and searches for objects of both small size (coins, rings) and large metal products. The metal detector works through the ground to a depth of 80 centimeters. The display shows the level of discrimination and the number of VDIs. There are three automatic search programs, automatic and manual ground type adjustments to reduce the influence of soil conditions on signal quality. A bonus is a flashlight and a rubberized handle with adjustment. Judging by the reviews, this is the best inexpensive universal metal detector.

3 Fisher F22

Best Selling
Country: USA
Average price: 18350 rubles.
Rating (2019): 4.5

Fisher can be called a pioneer in the world of metal detectors. The first model appeared back in 1931, and was, of course, far from today's technology. On the this moment In the assortment of the company there are also models for beginners. F22 is just one of them. The main feature of the device should be attributed very high speed work, which is useful when searching in a heavily polluted area. Thanks to the fast response, it is easier for the user to distinguish between several closely spaced elements. Also stands out protected control unit with touch keys, which is not afraid of water and dirt. Otherwise, this is a fairly ordinary, but well-made metal detector.

Advantages:

• Very fast processor
• There is a Notch mode designed to manually exclude a specific group of objects
• There is a digital indication on a scale from 0 to 99, which allows you to more accurately determine the composition of the detected object
• You can install the Nel Tornado coil, with which the detection depth increases to 1.5 meters!

2 Garett Ace 250

Popular
Country: USA
Average price: 17650 rubles.
Rating (2019): 4.7

This metal detector from Garett has gained such high popularity among domestic treasure hunters that it even has an affectionate nickname - "ICQ". The model gained such fame due to a good combination of characteristics, cost, build quality and reliability. The latter is far from unimportant, because the device does not work in greenhouses, but in the field. It is also worth noting the most simple control, which even a person completely unfamiliar with metal detectors can handle. In general, all these advantages are also characteristic of other Garett models, and therefore the entire range of this American company can be recommended for purchase.

Advantages:

• There is a graphical indication of the type of metal and the depth of occurrence
• 5 search modes: all metals, jewelry, relics, coins, custom
• 8 positions sensitivity adjustment
• Very high reliability
• It is possible to purchase a coil from Nel, which significantly increases the depth of detection

Flaws:

• Only 3 tones of sound indication

1 Bounty Hunter Tracker IV

The cheapest
Country: USA
Average price: 6450 rubles.
Rating (2019): 4.8

metal detectorfrom America conquered the Russian market with its low price and high search accuracy. Buyers often note in reviews that this state employee is not inferior to expensive and advertisedmetal detectors- finds metals at a depth of up to 80 cm. The round coil is waterproof, so it calmly searches for ferrous and non-ferrous metals in water up to 15 cm deep.

The power element is a crown. The frame is made of plastic and metal. It is adjustable in length from 114 to 135 cm and has a weight of 1.35 kg. There are three search modes: all metals, DISC, TONE. The first mode is for search absolutely any metals, including gold , the second - to ignore metal debris, the third - for a more efficient search for non-ferrous metals.

The best mid-range metal detectors: budget up to 30,000 rubles.

Metal detectors of this group can hardly be called devices for beginners. Yes, they are still not very difficult to master, but they already have a significantly expanded functionality, which, if not increasing the area and depth of detection, certainly makes metal recognition more convenient and accurate. According to the possibilities, the price, of course, also increases. It does not differ so much from devices in the budget segment, but it is already difficult to call it affordable.

In general, metal detectors of the middle price segment can be addressed to people who are serious about pursuing their hobby. For such users, searching for valuables is not yet work, but it is no longer just a pleasant pastime a couple of times a month. It is also worth noting that devices from this category can be safely purchased by people who, over time, are going to devote even more time and effort to searching, because the functionality is not very critically different from premium models, and therefore such metal detectors are purchased for many years. You can look at the best models in our rating.

5 Deteknix Quest Q40

Manual and automatic ground balancing
Country: USA (made in China)
Average price: 26690 rubles.
Rating (2019): 4.6

Another Deteknix metal detector rightfully deserves a place in our top. The design of the device differs from most other models - the handle with the control unit can be moved and mounted on a straight three-piece bar as you like. The detection frequency is 13 kHz. Powered by a built-in Li-Pol battery with a capacity of 2000 mAh. There are both automatic and manual ground leveling, which is the best solution for a metal detector.

There are six search modes. You can increase the response to non-ferrous metals, which is very convenient when searching in a littered area. The voice acting changes depending on the setting. He is looking for both the smallest objects made of ferrous metal, and things made of non-ferrous metal are more expensive.

4 Garrett ACE 400i

Small Target Detection
Country: USA
Average price: 25950 rubles.
Rating (2019): 4.6

A good metal detector in the middle price segment. A distinctive feature of this model from its counterparts is the presence of Iron Audio. This function sounds ferrous metals and non-ferrous metals in different tones so that they can be immediately distinguished without starting to excavate. Iron Audio works even when the discrimination sleeper is disabled.

With a detection rate of 10 kHz, the ACE 400i detects even the smallest targets. But the higher the frequency of detection, the shallower the depth. There are five modes to search for coins, jewelry, all metals, including gold, relics; and manual setting, in which the set parameters are remembered for subsequent use. This model definitely deserves the attention of potential buyers.

3 Fisher F5

Wide functionality
Country: USA
Average price: 25900 rubles.
Rating (2019): 4.6

Fisher is part of top best manufacturers metal detectors. And this model is another masterpiece. Although beginners will have to tinker with learning manual ground balance, but the time spent is worth the result.metal detectorrefers to professional equipment and, in addition to its standard functions, is able to analyze the soil and show the degree of its mineralization, as well as accurately localize the location of the deposited object.

The maximum detection depth is 110 meters. The 10-inch elliptical coil has high sensitivity to small targets and moisture protection, which allows you to searchcoins and jewelryin shallow water. Operating frequency - 7.8 kHz. A small weight of 1.3 kg does not allow the hand to get tired of long searches.

2 Garett Ace 350 Euro

Best price
Country: USA
Average price: 23300 rubles.
Rating (2019): 4.6

Ace 350 is the closest relative of the popular ICQ in Russia - the 250th model. Like the younger model, this device has an excellent value for money. Yes, the functionality is a little behind the leader of the rating, but you will have to pay much less for Garett. main feature Ace 350 - versatility - the model is able to work in antiquity, and for treasure hunting, for beach search, and for military archeology. In general, an excellent model for a wide range of search engines for little money.

Advantages:

• The cheapest metal detector with a DoubleD-coil in the kit, providing greater depth and accuracy of detection
• Full Russification (on models from 2013), thanks to which it is easier to master the device
• Includes Garett branded headphones with volume control
• Four-level depth scale
• There is a case for the electronic unit and a backpack for carrying

1 Minelab X-Terra 705

Buyers Choice
Country: Australia
Average price: 30476 rubles.
Rating (2019): 4.7

And again, we turn to the line of semi-professional metal detectors from the famous Minelab. The 705th model is the top of the X-terra line, and therefore has the most extensive functionality and the most advanced technologies. Here you have more frequencies, and ground balancing, and a "DDshnaya" coil. Yes, even the lower stem is made of carbon - that's where the technology is! What is even more amazing, it is combined with the same clear interface in the form of pentagrams, which even an inexperienced searcher will understand. Finally, the cost - with such characteristics, it is quite low.

Advantages:

• The presence of 3 frequencies - 3 kHz, 7.5 kHz and 18.75 kHz, which allows you to search for objects of different sizes
• There are both automatic and manual adjustment to the ground
• Display backlight
• Work from 4 AA batteries up to a day (24 hours)
• 28 segments of the scale for determining ferrous and non-ferrous metals
• Multitone - up to 28 tones

The best professional metal detectors

Finally, we got to premium devices. Newcomers will no longer acquire such ones, if only because of their high (over 30 thousand rubles) cost. The number of functions in this category is the largest, but mastering them all will be quite difficult even for an experienced searcher, not to mention beginners. In these devices, everything is aimed at the most accurate and fast search for the desired object. Of course, they will not do the work for you, but they will certainly make it as easy as possible. In order not to delay, let's move on to the rating of the best professional metal detectors.

5 Fisher Gemini 3

Maximum depth of finding metals
Country: USA
Average price: 54250 rubles.
Rating (2019): 4.5

A unique deep-seated metal detector from Fisher. This model is chosen by those who are tired of occasionally finding coins at a depth of 10 cm and are ready to explore the bowels of the earth in search of treasure. The search depth for large objects reaches 6 meters. The metal detector simply ignores small targets. Looks for both local objects and extended ones.

Soil mineralization often gets in the way when looking for metals, but the Gemini 3 has special settings to help overcome this difficulty. Power is supplied from 1.5 V AA batteries that hold a charge up to 45 hours. The detection frequency is 81.9 kHz with a weight of only 2.8 kg. Ground balancing - manual. Suitable for gold prospecting.

4 Minelab GPZ 7000

Best for finding gold
Country: Australia
Average price: 554990 rubles.
Rating (2019): 4.5

The Australian brand has created the perfect metal detector for gold miners, which deservedly made it to our top of the best models. The innovative ZVT gold search system will allow you to find gold at a depth that is not available to others. At the same time, the "seven thousandth" is adjusted to the maximum sensitivity of gold, so you can easily find valuable items even where other metal detectors have passed more than once.
In addition, the manufacturer pleased with the possibility of precise ground balancing. Even with “difficult” mineralized soil, the model copes perfectly, balancing the indicators for accurate search in super-heavy soils. The model is also endowed with a noise immunity function - more than two hundred channels of noise reduction provide a smooth search without atmospheric noise. Well, the cherry on the cake was a waterproof coil (can withstand immersion up to one meter) and a waterproof case that allows you not to interrupt the search during the rain.

3 Fisher F75

Good price
Country: USA
Average price: 37999 rubles.
Rating (2019): 4.5

No matter how strange it may sound, the top-end metal detector from Fisher has the lowest cost among professional-class devices. Moreover, the price does not impair the capabilities of the device. Yes, there are no ultra-modern materials or classified proprietary technologies. It's just a metal detector high level who does a great job. There are also many manual settings and increased speed.

Advantages:

• Detection depth up to 1.9 meters
• User-friendly control unit with backlit LCD display
• Battery life 25-30 hours (depending on the type of batteries used)
• Well balanced, thanks to which the mass of 1.62 kg is almost not felt

2 AKA Signum MFT 7272M

Best Detection Depth
Country Russia
Average price: 50,000 rubles.
Rating (2019): 4.7

Metal detection is one of the few areas in which domestic equipment seriously competes with world famous brands. Many reputable search engines call Signum "legendary". And, of course, there are many reasons for this. In short, the MFT 7272M offers the user simply endless possibilities for fine-tuning each individual parameter. It is also worth noting the excellent selectivity - for example, this model is able to distinguish a beer cap from a coin.

Advantages:

• Possibility of flexible frequency setting - from 1 to 30 kHz
• Hodograph - increases the accuracy of targeting
• Maximum detection depth - 2 meters - the best indicator
• Available with straight or S-bar
• Moisture- and dust-proof housing

1 XP Deus

The most technological
Country: France
Average price: 50999 rubles.
Rating (2019): 4.9

The name of the metal detector is more than speaking: lat. Deus translates to "God". In this model, the manufacturer has collected the most advanced technologies at the moment. Moreover, these innovations are useful not only directly for searching for objects, but also add elementary convenience. What is worth the lack of wires. Yes, yes, the coil, the electronic unit and the headphones are connected here “by air”. Of course, such a solution also has an unpleasant side - the need for constant charging of all elements. But lightness (only 970 grams) and convenience more than pay for this small drawback. Of course, in addition to this, the device has other features.

Advantages:

• There are four frequencies: 4 kHz, 8 kHz, 12 kHz and 18 kHz, as well as a frequency shift function
• Advanced sound indication
• A large number of ground balance settings (Tracking, Surface area, manual adjustment and more)
• There are factory presets and the ability to write user programs to the built-in Flash-memory
• Built-in lithium batteries
• Has a USB port for charging and software updates

Flaws:

• Some users note uncomfortable headphones

Any search engine has ever thought about how to improve the search characteristics of their device. Usually you want to increase both the sensitivity and the depth of detection.

Target detection depth depends on many factors.

The first and most important of these is soil mineral composition . The higher the mineralization, that is, the more alkaline or salty the soil, the less the depth of detection. If your metal detector has a manual ground balance, great. Tune it properly and it will give you more depth.

Further, the depth depends on target dimensions . And if you can easily find a coin with a metal detector at a depth of 25-30 cm, then an ax, shield or bell with the same device can be found deeper, at a level of 1-2.5 m. Decide on the size of the targets you are going to look for, and before that, work in the local library (in the archive). If you are looking for coins, you are on the way to the places of former settlements, and if you are looking for artifacts, then to the places of epic battles.

affect depth and weather . It is well known that wet soil conducts the signal better and it is possible to detect deeper objects on it. Therefore, the search is good in the morning, during dew, or after rain. But when there is snow on the fields, it is better to postpone the search - the depth will be almost none due to the thickness of the snow cover.

An important influencing factor is user's ability to correctly configure your metal detector. So, for example, constantly using discrimination and not paying attention to the threshold tone settings, it is very easy to miss up to 20% of good finds.

Three technogenic factors - frequency, coil characteristics and software on the control box - complete the list. Briefly about them, then: for deep search, they choose low-frequency devices (from 3 to 8 kHz), a large coil diameter (preferably DD), and it’s also a good idea to purchase a high-quality metal detector from a reliable manufacturer (Minelab, XP, White "s) in order to guarantee decent, non-buggy software.

As a result, in order to increase the detection depth of your metal detector, we advise:

• thoroughly study the capabilities and settings of the device;
• buy a new coil;
• go out to search for dew or after rain.

And, finally, you can choose