World of tanks fps increase. How to raise fps in World of tanks for weak computers. Change graphics settings

World of Tanks is a very popular game, millions of tankers fight on the battlefield every day. In order to set the maximum settings, you need a powerful computer, which, of course, not everyone has.

Low FPS can be adjusted so that there are no strong lags on minimum settings. In order to achieve optimal values, you must adhere to the points below, but first a little theory.

What is FPS

Frames Per Second (FPS) translated from English means the number of frames per second. The higher this value, the better, the better the picture on the screen. It looks more realistic and smooth. Modern computers, the hardware and software of which is constantly updated, can produce hundreds of FPS even at maximum settings. Outdated computer models are content with lagging average settings at best.

What determines FPS WOT

FPS is a single computer system. If some component of the PC does not provide enough resources, the performance of the computer drops, therefore, the FPS will not be high in such a situation. In order to deal with the FPS, you need to study the computer and identify its weaknesses.

What FPS should be in WoT

A comfortable FPS value is determined by the player himself, however, for the normal more or less non-lag operation of the World of Tanks game, the required value is from 30 frames per second. If the FPS is from 60-120 and above, this is considered a high indicator, however, as already mentioned, this is only available to powerful computers. If the number of frames per second falls below 30, then the picture quality will turn out to be appropriate: friezes, freezes - unpleasant and inconvenient.

Why FPS sags in World of Tanks

The number of displayed frames per second primarily depends on the power of the device. Influenced by:

• number of processor cores, frequency;
• RAM and speed;
• video card and its speed;
• hard drive, its speed and percentage of occupied space;
• heating level of components;
• general state of the system and more.

It follows from this that the first step is to compare system requirements World of Tanks games and PC power.

For minimum settings, in order to get normal operation at 30 FPS as a result, you need to:

• Processor: 2 cores at 2 GHz or better.
• RAM: 1.5.0.1 GB.
• Video card: 256 MB.
• Free disk space: ~25 GB.

For higher settings, i.e. 60 FPS, 120 and more, you need:

• Processor: 4 cores at 3 GHz.
• RAM: from 4 GB.
• Video card: 2 GB or more.
• Free disk space: ~36 GB.

What to do if the power of a computer or laptop does not give out more than 10-20 FPS, and the device itself does not reach minimum requirements games? Most likely nothing will work. You should pay attention to online games about tanks, including session ones.

The minimum requirements correspond to the hardware of the computer, but the FPS does not reach 30? Please refer to the instructions below.

Setting up World of Tanks to increase FPS

First of all, you need to reduce the graphics settings in the settings of the game itself. Special effects, shadows, realistic structures and so on can take a lot of computer resources. Therefore, for productivity and comfortable game it is best to keep them to a minimum.

To do this, you need to open a window World settings of tanks.

• Switch to full screen mode. windowed mode often causes FPS spikes.
• Reduce screen resolution. It is easier for a device to display information on a small number of pixels. The resolution of 1366x768 is quite suitable for a comfortable game, but, of course, this is not the limit.
• Disable shadows. They greatly affect the performance of the video card.
• Disable vertical sync. This function is responsible for a flexible picture, but for an additional 5-10 frames per second, you can sacrifice this.
• Disable triple buffering. It is only effective when vertical sync. If the latter is disabled, then it makes no sense to leave triple buffering enabled.
• Disable anti-aliasing. This parameter contributes to the smoothness of the picture, but with a weak device, in favor of comfort, you can sacrifice beautiful visualization.
• Disable all special effects. Steam, smoke, fire - all this is beautiful, but on powerful PCs. For weak devices, it is better to take care of the comfort of the game without friezes and downloads.
• Reduce the quality of terrain and vegetation. The situation is the same here, good drawing is reflected in performance.
• Disable grass in sniper mode. The point here is not only in FPS, but also in the fact that this parameter affects the game itself, sometimes creating interference when shooting.
• Lower graphics settings to the minimum. This is done in order to reduce the load on the video card.
• Lower the resolution of the 3D render. The depth of the 3D scene depends on this parameter. The smaller it is, the higher the performance of the computer will be in the end.
• Decrease draw distance. The field of view also greatly affects the FPS, the smaller it is, so, accordingly, the computer will process data faster.

After these options are turned off, the picture will become much worse, the smoothness of objects and the drawing of landscapes will disappear, and the small resolution of the game on the big screen does not look presentable, however, in order to get the game without lags and friezes, you need to follow the above points.

How to raise FPS in World of Tanks: setting up and cleaning your computer

A performance increase, although small, can be obtained by optimizing the parameters of the computer or laptop itself.

Clean your PC of junk files

The steps to clear the computer of garbage, "cache", should become a habit, because they must be performed regardless of the games or programs used. In order to clean your computer, there are many different applications and utilities.

For example, a special CCleaner utility is free and one of the most popular today. You can download it on the official website. After a short installation, you need to perform a number of actions:

1. Launch CCleaner.
2. Go to the "Cleaning" section located on the left side of the interface.
3. Click on the "Analyze" button, wait for the scan to finish.
4. Select "Clear".

Registry Fix

The registry stores data that helps the system interact with applications. Errors in the registry slow down the performance of your computer, so you should also follow the instructions below:

1. Launch CCleaner.
2. Select the "Registry" section.
3. Click on the "Search for problems" button.
4. After the scan is complete, select "Fix Selected..."
5. A window will appear where you need to specify the need for a backup.
6. Next, you need to click on the "Fix marked" button.

Transfer game from drive C:/

Very often the computer works slowly with large files due to the fact that they are installed in the local drive C:/. In order to correct the situation, it is not enough just to copy and paste folders from one drive to a drive, for example, D: / or E: /. For this you need:

1. Uninstall World of Tanks game.
2. Once again install Worldof Tanks on another, more spacious, local drive.

Defragment your hard drive

If you often install a lot of games and programs, this can lead to a scatter of applications across different sectors of the hard drive, which is also the reason for the long processing of the request. Defragmentation solves this problem by moving data closer together. For this you need:

1. Open the "My Computer" folder.
2. click right click mouse to the local drive where the game is installed.
3. Select the "Service" tab.
4. Open the "Optimization and defragmentation" subsection, select "Optimize".
5. In the list, select the desired local disk and click "Analyze".
6. It remains to wait for the completion of the analysis process and, if necessary, click "Optimize".

This manual is relevant for operating system Windows 10. For earlier versions of the OS, the order may be slightly different.

Update your graphics card drivers

New versions of drivers optimize the operation of the video accelerator, so the FPS in the game will be higher, and good graphics will be more accessible. In order to update the driver, you need to download it from the official website of the video card manufacturer - AMD or Nvidia are the most popular.

Disable all unnecessary background programs

It is necessary to close all unused programs: Skype, Discord, Telegram, Steam, web browsers and so on. You also need to disable autorun of unnecessary programs that, when launched along with the operating system, slow down and slow down the computer boot. In Windows 10, the AutoPlay tab is located in the Task Manager.

Raise process priority

In order for the system to allocate more resources game world of Tanks, while sacrificing other running programs, you must set its priority. You need to right-click on World of Tanks in the Task Manager and select "High priority"

Disable Windows Visual Effects

You can lower the graphics of the operating system itself, the animation of the windows will disappear, and the overall look will become worse, while increasing the performance of the computer. For this you need:

1. Right-click on the "My Computer" folder, select "Properties".
2. Then click on "Advanced system settings".
3. A window will open where you need to select the "Advanced" tab.
4. In the "Performance" subsection, click on "Settings".
5. Select "Ensure best performance" and save changes.

What else can be done

• Remove all unnecessary programs, files and folders. The hard drive works faster if it is not overloaded.
• Install WOT on SSD. If you run the game from an external hard drive, then it will work better, and, accordingly, the FPS will increase.
• Hardware overclocking of components. The processor, RAM and video card can be overclocked. At the same time, the indicators improve, and the heating of the components, and hence the entire computer case, also increases. To do this, you need to clearly understand all the consequences of such actions, including the fleeting wear of the hardware.

Programs and mods

FPS in World of Tanks can be increased with the help of programs and modifications. The most popular software includes:

• CCleaner - removes unnecessary garbage, fixes registry errors and removes programs efficiently without leaving their files on the computer.
• RazerCortex is a program that frees up as many resources as possible when starting a game, making this particular game a priority for the entire system. Performance on weak computers increases by 10-30 FPS. The program allows you not only to improve the quality of the game, but also to record video, stream, perform defragmentation and much more. You can learn more about Razer Cortex on their official website.
• WOTTweaker is a program created specifically for World of Tanks. It allows you to turn off all unnecessary special effects - clouds, explosions, smoke, fire and much more. Significantly increases FPS on weak computers. You can learn more about this program on the developer's forum.

In addition to individual programs, they allow you to increase fps mods with compressed textures. They improve PC performance by reducing the load on the graphics card.

What to do if nothing helped

If none of the above gave any results, the game is still unplayable on the device and it was not possible to increase the FPS, then the only way out is to switch to another computer game. There are several good options here:

• Try playing War Thunder. This game at minimum settings works much better than World of Tanks. The technology here is varied (including aircraft and ships), and the mechanics are very interesting.
• Try to play Worldof Tank Blitz. This is a simplified version of the game, but it certainly cannot be called less interesting. The client is available for both mobile and PC platforms. Good online players and accessibility.
• Choose another tank game for weak computers.

Passion how I love to solve problems-riddles that IT-her-life throws up. This time the trouble happened in the beloved toy world of Tanks, where I'm trying to be a nerdy extra. The game has long been criticized by players in terms of performance, since competent multithreading has not yet been implemented in order to multi-core processors began to justify their purchase. But it's worth saying Thanks game developers that in the latest patch 9.14 they introduced a new sound engine, which not only colored the game with new sounds, but also runs on a separate CPU core, which has a beneficial effect on overall performance when playing on powerful computers. It would seem that fps should grow a bit, but my problem did not look like low Frames per Second in general, but fps drop in WoT after some time.

Since absolutely all available parameters are set to the minimum position, at first I sinned on modifications (mods) that extend the standard game client in Python. There are a couple of mods that are officially recognized by everyone as "fps reducers":

• legendary eXtended Visualization Mod (XVM, deermeter)
• mod Angles of horizontal aiming (UGN)
• a mod that reflects latency directly in battle to Wargaming.net servers.

OK! Let's remove the mods, but that didn't help. Thanks to a video from a well-known professional player and author of modpack ProTanki - , I was aware of the serious impact of bad Internet (high latency when delivering network packets) on FPS. Many do not understand how it can be connected network and video card. The fact is that the video card processes a lot of frames for you in the buffer and imagine a situation where, due to long delays, information comes from the server that your tank or tanks of allies / enemies are now not at this point, but at another, the so-called "teleportation effect". The video card is "forced" to throw out the previously done work and start calculating everything again. If the video card is not top-end, then it turns out that bad Internet adds work to it.

But logically, bad internet at not-my-home should keep low fps throughout the entire fight. And the problem with an enviable constancy looked exactly like a drop in fps after a couple of minutes of the battle. I began to look, and which settings are of a dynamic nature. I will not torment you, the setting is called dynamic change in 3D rendering. I also set the 3D render parameter to a satisfying 95%, which allowed small details to disappear and greatly simplify the silhouettes of tanks in the distance, which will make it easier for the video card to work. That's it! Drawdowns from 120 fps to 40 fps disappeared like a bad dream. Stay random, VasiliscCom goes to battle!

Consider an urgent issue for many gamers - optimizing the world of tanks and raising FPS for weak computers.
Many people know that World of tanks uses only a fraction of the power of your computer. Almost everything depends on the power of the processor. But what should owners of weak computers and laptops do? That's right, optimize the game with mods and programs. In this article we will consider the work of all mods and programs, we will install them. If you have a weak computer, then thanks to this instruction, you can significantly increase the number of frames per second (FPS) and you will be quite comfortable playing. Optimization consists of several stages.

To start install. This is a very useful program for turning off unnecessary effects. To install the program, move it to the folder with the game. Then run WOT file RES UNPACK.

After it finishes its work, run the .

It's time to install compressed textures, which are ideal for players who do not have powerful graphics cards. will make the game less beautiful, but you need to understand that beauty requires sacrifice. In our case, this is a sacrifice in the form of good graphics. We recommend installing the 25 percent version. It has the best ratio of quality reduction and FPS increase. Installation may take some time, sometimes quite long.
After textures install mod that. As a result of the work of this mod, the fog will disappear in the game and, when aiming at long distances, you will see the enemy more clearly. And when switching to sniper mode, the freezes that most players complain about will disappear.
The next step is to install, which is done with only one goal - to maximize the optimization of the game. It's not very pretty, but it's very optimized.
Let's move on to the settings of the game itself. We leave only the visibility range at the maximum. The rest of the parameters are set to a minimum or turned off altogether.

The FPS value (Frames Per Second) means the number of frames that your computer displays per second. The higher this indicator, the smoother your gameplay will look - there will be no lags and slowdowns.

You can normally play Wot starting with an FPS value of 30 frames per second.

1. Go to the graphics settings in the game and try to reduce everything to the maximum.
Yes, the graphics quality will decrease, some effects will disappear, it will be a little unusual to look at a clumsy and poorly drawn world, but your tank will deal with opponents without brakes and glitches.

3. Enter in the line that appears
"bcdedit /set increaseuserva*" (instead of an asterisk, specify the amount of RAM that will be used for applications.
It is recommended to use 75% from all your RAM on your computer.
For example, if you have 4 GB of RAM on your PC, then enter 3072 instead of an asterisk, for 2 GB - enter 1792).

Here we have 4GB of RAM on the PC.
We registered the value in 3072 MB. This will improve the performance of the game.

4. Restart your computer and run WoT - World of Tanks .

5. When you want to reset the values ​​​​of RAM usage - write in the cmd-term " bcdedit/deletevalue increaseuserva" (without quotes) and click Input.