Cs go fps increase. Setting up FPS in CS:GO on a laptop. Console commands to increase fps

Interesting fact- CS 1.6 can slow down even on very powerful PCs, despite the fact that the game has very modest, by modern standards, system requirements. So how to increase fps in cs 1.6? There are quite a few ways, most of them affect the in-game console, but some involve the use of third-party software, which can be very risky, so you should not consider such options.

The FPS itself, or Frames per Second, or the frame rate per second, is highly dependent on the performance of the computer. In some games, the processor plays a leading role, somewhere the graphics card is heavily loaded. At high values, all objects move much more smoothly, which allows you to quickly respond to various situations. That's why it's important to keep an eye on your PC to prevent slowdowns. In addition, there is no anti-aliasing parameter in the CS, which also has a big impact not only on the gameplay, but also on the player's ability to adjust other parameters to increase the frame rate.

Another important factor is the speed of the Internet - with poor ping, some of the packets are lost, which causes freezes and lags, and then a drop in FPS. So it is best to play on servers with good and stable ping up to 70 ms, if it is higher, then shooting becomes not very comfortable, and the right of the first shot passes to the enemy, since his hits will be processed first.

How to raise FPS in CS 1.6

1. Go to "Settings".
2. Open the Video tab.
3. Uncheck the box " Vertical Sync».

After these steps, the FPS level should increase quite well, but the problems do not end there, because the image may twitch, or graphic artifacts may appear. The limitation on the frame rate is removed by entering the command developer 1, after which it is entered fps_max 150. Alternatively for new builds - just type fps_override 1, after which you can admire the high FPS without much subsidence. In general, the fps_max command allows you to overclock the frame rate to any value, which depends only on the power of the player's computer.

Conclusion

Raise FPS in Counter-Strike 1.6

FPS in cs 1.6- this is the frame rate that the game gives you depending on your computer. If you have a higher value, then the quality of graphics, smooth shooting and decrease in ping in cs 1.6 you are guaranteed. But even if, unfortunately, you have a very ancient resource on which you play, then the frames will be slowed down and you will start to lag. Thanks to config for fps boost in counter-strike 1.6 up to 100, you will get rid of this problem, that's why special configurations were created in cfg for fps increase, do these short procedures and you will have a super game.

Variables for raising fps in cs 1.6

1. The first thing you need is to create a text document. To do this, open notepad and paste this data there:

developer 0
rate 25000
cl_cmdrate 101
cl_updaterate 101
cl_shadows 0
cl_minmodels 1
max_shells 1
max_smokepuffs 0
fps_max 200
fps_modem 200
mat_dxlevel -70

Or you can just download an installation file that will add you a config with an already configured config to raise fps to 100.

How to install:

1. Run the downloaded file and select the folder with the game

2. The config is installed, you can play

So we have done small procedures for you increase fps in the game counter Strike 1.6 for cfg. Now you can enjoy a pleasant game and a small counter ping. And your shooting will be amazing. But if you do not want to bother or do not understand what needs to be done, you can already set up and increased FPS in the config from our site.

Launch parameters

What are launch options and where to find them:
Launch Options - Options manually configured by users for various changes in the game.
Launch Options Location (CS:GO):
Steam library -> RMB on the line CS:GO -> Properties -> Set launch options.

Actually launch parameters (Enter everything with "minus" and "plus" (as shown below)):
-novid - removes the intro logo, CS:GO will load a little faster;
+fps_max "Y" - fps limit (up to "Y"-1 frames per second) (for example, with fps_max 101 fps in the game will be equal to 100;
-high - starts the game with high priority;
-freq 60/75/144 - screen refresh rate (hertz of your monitor);
-language english - CS:GO in English;
-threads "X" - number of threads, where "X" = number of cores * 2 (1 core = 2 threads);
-dxlevel 60/70/80/81/90 - changes dxlevel (DirectX version 6/7/8/8.1/9 respectively) (If your DirectX version is higher than 9, then you do not need to enter the command);
-console - turns on the console in the game;
-heapsize "Z" - allocates random access memory (RAM) for the game (In Kilobytes) (recommended 60-80% of the total random access memory), where "Z":
512MB = 393216
1GB = 786432
1.5GB = 1179648
2GB = 1572864
4 GB = 3145728
-noaafonts - disable screen font smoothing;
-w "M" -h "N" - sets the resolution to "M" x "N" pixels (eg 800x600);
-nocrashdialog - hides some errors;
-window / -fullscreen - starts the game in windowed / fullscreen mode, respectively;
+cl_forcepreload 1 - preloads the entire map, thereby increasing FPS;
-tickrate 128 - sets tickrate to 128 (but only on servers you created);
-cl_interp 0 - time interval through which interpolation occurs;
-cl_interp_ratio 1 - number of gaps between "interpolation" of the world;

My launch options (with explanations):
-language english;
-novid;
-high;
-threads 6 - because I have a 3-core processor (3*2=6);
+cl_forcepreload 1;
+ fps_max 131 - fps limit to 130 (so as not to feel special subsidence during molotov, smoke grenade);
-w 1680 -h 1050;
-noaafonts;
-heapsize 2359296 - 75% of my 4GB RAM;
-tickrate 128;
-nocrashdialog;

Language english -novid -high -threads 6 +cl_forcepreload 1 +fps_max 131 -w 1680 -h 1050 -noaafonts -heapsize 2359296 -tickrate 128 -nocrashdialog

Game settings

Video settings:
- Brightness: Does not affect fps, so I advise you to set the minimum value (1.6);
- Display mode: Full screen;
- Screen format: It's not for everyone, but if fps is important to you, then put "Normal, 4:3";
- Resolution: The same situation as with the screen format: the smaller, the more fps;
- Energy saving mode: Off;

Additional video settings:
- Overall shadow quality: Very low;
- Detail models and textures: Low;
- Detail effects: Low;
- Shader detail: If you like to admire skins, then set at least Medium, but if the fps value is negligible or you don't care about the beauty of skins, set it to Low;
- Multi-core processing: On;
- Multi-sampling anti-aliasing mode: No (but I set 2x MSAA); *
- Texture filtering mode: Bilinear (but I set Anisotropic 2x); **
- Anti-aliasing with FXAA: Off;
- Vertical Sync: Off;
- Motion blur: Off;

One caveat with the audio settings:
- Speaker configuration: Headphones with HRTF (Introduced in the update from 12/08/2016) well, it eats fps very much (20-40);

Footnotes:
* MSAA - emphasis on performance;
FXAA - something between MSAA and CSAA
CSAA - emphasis on graphics quality;
2x - 16x - the lower the value, the higher the fps.

** Bilinear - emphasis on performance;
Trilinear - very similar to Bilinear, but fps is slightly lower;
Anisotropic - emphasis on image quality.

Graphics card setup (NVIDIA)

Here we need the 3D Settings section, namely the tabs "Adjust image settings with preview" and "Manage 3D settings":

Adjusting picture settings with preview:
All we need to do is set "Custom settings with a focus on performance". To do this, drag the slider towards "Performance":

3D settings control:
- CUDA - GPUs: All;
- Anisotropic filtering: Off (as in CS:GO);
- V sync: Use 3D application setting;
- Ambient Light Shading: Off;
- Shader Caching: On;
- The maximum number of pre-trained personnel: 1;
- Streaming optimization: On;
- Power management mode: High performance mode;
- Antialiasing - FXAA: Off;
- Smoothing - gamma correction: On;
- Smoothing - parameters: Application control;
- Smoothing - transparency: Off;
- Smoothing - mode: Application control;
- Triple buffering: Off;
- Texture filtering - anisotropic optimization: Off;
- Texture filtering - quality: High performance;
- Texture filtering - negative deviation: Snapping;
- Texture Filtering - Trilinear Optimization: On.

By the way: video cards are different for everyone, and therefore the parameters are different. I gave an example of my video card parameters with a focus on performance (increasing fps).

System Setup

CS:GO is also affected by your system setup:
Get rid of unnecessary programs that load your processor and eat up RAM (you can also turn off the antivirus so that it does not hang in background applications and does not eat up RAM, but this is at your own peril and risk):
Win + R -> A window pops up, in the line we write msconfig -> Another window pops up, in it we find the "Startup" tab and go to it -> Disable unnecessary programs
(there are a couple more alternatives, but for reasons I don’t understand, this particular method has taken root for me);
Update all drivers (manually or using the program (look at both, otherwise you will pump up Amigo));
NEVER use a Razer Game Booster. I can't say anything about other programs;
Download a normal antivirus (well, or hack a paid one using various programs (I do not recommend it)). I use Avast antivirus free version) - satisfied!;
You can also climb in themes (design): RMB on the desktop -> Personalization -> Themes -> There you put the most primitive one (like in windows 95/2000) (I personally did not experiment, but they say there is an increase in fps).
Transfer CS:GO to an SSD drive (if available): this will also give an increase in fps;
Change the power setting:
For windows 10: Start -> Settings -> System -> Power and sleep -> Advanced power settings -> High performance (but mom will have to pay a little more for electricity);
If you have windows 8/8.1/10 and fps below 50, then try to install older versions: windows 7 (or even windows XP);

Black bars

About the black bars:
I’ll say right away that most professional players play with stripes, but this is not for everyone: it’s convenient for some, but not for some (Usually it’s convenient for players who started playing during the cs 1.6 era, when there were square monitors). In fact, black bars just turn the image into a square (if you have a square monitor, then you will not see black bars). By the way, this feature also increases fps (because not the entire screen is involved, but only part of it).

We put black bars (for NVIDIA video cards):
RMB on Desktop -> NVIDIA Control Panel -> Display -> Adjust Desktop Size and Position -> Now you need to select the dot opposite "Aspect Format", then "Perform Scaling" on the GPU and check the box next to "Override scaling mode" . Set the resolution to 1024x768 and click Apply.
Then we go to CS:GO and in the video settings, the screen format is 4:3 and the resolution that was set in the NVIDIA settings.

Conclusion

Well, you never know someone does not need a shirp.

Today, I will talk about how to increase FPS in CS:GO and it will definitely be useful to you. FPS becomes more and more every year important characteristic for games and in order to understand how to increase this characteristic in CS:GO, you should know the reasons for the drawdown even on powerful computers. So follow the instructions and enjoy a smooth KSochka 😎.

• Game updates;
• Adding and updating some maps;
• CS:GO is getting more demanding;
• FPS depends on the configuration and settings of the PC (what programs you use, video card performance settings);

How to maximize fps in CS:GO

Before writing the guide, I studied in detail how professional esports players deal with this issue, probably re-read the entire REDDIT, and only after that I published a simple guide on how to increase fps in CS:GO.

Important Notes:

• I did not add any information about special software, any FPS accelerators and other software, as I consider it superfluous;
• My recommendations are exactlywon't harm your PCand will help improve the performance in the game and increase the average FPS.

Reinstalling Windows

First of all, to improve PC performance in the CS:GO game, you need to reinstall Windows. Active processes and startup processes are one of the most influential factors on FPS. The longer you work in the OS, the more active processes on Windows. So, if you haven't reinstalled Windows for a long time, do it.

After reinstallation, your computer itself will work much faster. Let's move on to the next step in answering the question of how to increase FPS in CS:GO.

Setting up a video card for CS:GO

Setting up a video card is one of the most important elements for a cool FPS. If you just installed Windu, then update the drivers (links will be below), if you haven’t reinstalled, then go straight to the settings (next subheading)

Link to driversAMD:http://support.amd.com/en-us/download

The next step is to set up the two most popular brands of vidyuha and Radeon (AMD):

Setting up an Nvidia graphics card for CS:GO

Video card setup is a very important section that is important to understand in order to answer the question of how to increase FPS in CS:GO.

First of all, go to nvidia control panel. To do this, just click right click mice on free space on the desktop of the computer and in the menu, select the desired partition.

Next click on Adjust image settings with preview. Click on Custom settings focusing on: and twist Performance to the maximum.

On the same list Filtrationtextures - quality- twist tohigh performance.

Radeon graphics setup for CS:GO (AMD)

Note:all settings will be English language, but in principle, it should be intuitively clear to you how to increase fps in CS:GO using the AMD video card settings.

Right click on desktop and openAMD Radeon Settings. Let's go to Gaming and choose global settings. Then adjust the settings as you see on the screenshot.

Console commands to improve FPS in CS:GO

The next step is to open STEAM library, choose CS:GO, click onProperties then on Set launch optionsand write commands:

— novid- Removes the video preview that appears at startup;

- high- Starts the game in the status of "High priority";

- freq x(60, 75, 120, 144)Hz - Display refresh rate (monitor screen refresh rate)

CS:GO graphics settings

In order to maximize fps in CS:GO, set up the graphics as in the screenshot below:

It's simple: open"My computer", right click on an empty area -> click onProperties.

Click on Additional system settings

Ensure the best performance. (all checkboxes must be disabled)

System configuration setup

Clamp together Win+Rand write in the consoledon't forget to pressOK.

and click on Additional Options...

In the drop-down menu, select the largest number of processors.

Power configuration setting

Come in Control Panel-> Equipment and sound-> click on

Choose

Disable startup programs

As I said earlier, disabling the autoloader is the most important factor in order to understand how to increase fps in CS:GO. Pressing an already familiar combinationWin+R -> enter and squeeze OK(screenshot above).

Click on and disable all programs that are not needed to work in Windows (I have a ton of such programs).

Disk defragmenter (not for SSD)

We open My computer-> right-click on the disk where Windows or our favorite KSochka is stored -> selectProperties-> click Service-> in the window Disk optimization and defragmentationand click on the buttonOptimize click Analyze to understand what errors there are and then again the button Optimize.

Cleaning the computer and replacing thermal paste

The final chord in optimizing your computer for playing CS:GO is cleaning your computer of dust and replacing thermal paste. This will help reduce the temperature of the parts and improve the performance of the device. How to do this is a completely different question, the answer to which you can already find on another site, since in this regard I am a complete handjop and I can’t help you with anything 😋.

How to increase FPS in CS:GO. Conclusions + video

In general, these are the tips that will help you increase FPS in CS:GO. Write in the comments your ways of optimizing your computer for the sake of a great KSochka :). Catch a good video with tips on how to improve fps.

P.S. I wrote an article that gives insight how to make money on esports. I'm sure you'll find it interesting

basic settings

First, let's see the FPS in Counter-Strike 1.6 by entering the command in the net_graph 3 or cl_showfps 1 console. According to the standard, the CS works at 72-75 FPS.
In the console, set the maximum FPS rate fps_max 101 command, now the game gives a maximum of 100 FPS. In Counter-Strike 1.6, you can max out at 100 FPS, but if you have a powerful computer, you can remove this limitation with the fps_override 1 command, which removes the 100 frame limit. If you have a Non-steam version, write the developer 1 command. Always update video card drivers. Always update them from the official site, never trust other sites. Also don't forget about DirectX. These settings are enough to increase the FPS in CS 1.6 to a playable level, without degrading the already simple graphics.

Critical settings

If you have very weak computer, then add the following commands to your config:
cl_corpsestay "0"
// Instant disappearance of corpses on the ground after killing

cl_himodels "0"
// Disable detailed player models

cl_radar type "1"
// Disable Radar Transparency

hpk_maxsize "0.001"
// Faster loading of the game itself (not the menus) by reducing the size of HPK files downloaded from the server.

joystick "0"
// Disable joystick support, less RAM allocation for the game

mp_decals "0"
// Disable rendering of bullet holes (decals). The number of decals displayed at the same time, shot holes, blood stains, etc.

net_graphpos "0"
// Disable the channel's internal monitoring schedule. Less processor.

s_a3d "1"
// Enable A3D hardware support for sound

s_eax "1"
// Enable hardware EAX support for sound

setinfo "_vgui_menus" "0"
// Disable the graphical menu for buying weapons, choosing a team, etc.

setinfo "_ah" "0"
// Disable auto-help (text hints)

cl_weather "0"
// Disable weather (for example, rain on the de_aztec map).

max_shells "0"
// Disable shells

max_smokepuffs "0"
// Disable all kinds of haze (from bullets when firing a weapon, from bullets hitting walls, etc.)

gl_lightholes "0"
gl_keeptjunctions "0"
// Disable "stitching" of textures, noticeable at the corners, the contact of walls, floors, ceilings. In general, where the textures meet

gl_playermip "2"
// Player detail quality. How more number, the faster the rendering, but the worse the quality.

gl_dither "1"
// 1 - turns on the anti-aliasing mode, 0 - turns it off. In 16-bit mode

gl_polyoffset "0.1"
// How much memory to allocate for drawing modified textures. "0.1" the best

cl_shadows "0"
// Disable Shadows

violence_ablood "0"
violence_agibs "0"
violence_hblood "0"
violence_hgibs "0"
// How much blood flies out of the player when hit by bullets

gl_zmax "1024"
// Maximum Z-buffer size. According to the "6400" standard. "1024" optimal in terms of fear / visibility

gl_wateramp "0"
// Remove waves on the water

r_mmx "1"
// Enabling support for the MMX instruction set by the processor

r_decals "0"
// Maximum number of simultaneously visible decals (bullet marks, grenade marks, logos, etc.).

vid_d3d "0"
// Disable Direct3D extensions (disable if playing OpenGL!).

ati_npatch "0"
ati_subdiv "0"
// Disable patches for ATI graphics cards

gl_reportjunctions "0"
// Disable internal texture stitching reports

cl_nopred "0"
// Don't predict the player's movements. If you want to see the smooth movements of other players, and even yourself, do not enable this option (value "0").

cl_nodelta "0"
//

fastsprites "2"
// Quality of sprites (0-best, 1-average, 2-worst).